• DE EN 中文
Audio_System_1_V_Lock_Akustik_Musikanlage Audio_System_1_V_Lock_Akustik_Musikanlage

Audio

Plugs and sockets, SMD fuses and fuseblock with gold plated contacts, power entry module filter with ground line choke

Plugs and sockets, SMD fuses and fuseblock with gold plated contacts, power entry module filter with ground line choke

V_Lock V_Lock

V-Lock

Cord retention system for IEC appliance plugs and sockets

Cord retention system for IEC appliance plugs and sockets

V_Lock_Banner_KEA V_Lock_Banner_KEA

KEA

IEC Appliance Inlet C14 with Fuseholder and V-Lock cord retention

IEC Appliance Inlet C14 with Fuseholder and V-Lock cord retention

Power Entry Module

KFA Compact wtih Filter and now with Ground Line Choke

SCHURTER’s popular power entry module, KFA series, is now equipped with an additional ground line choke to suppress high frequency interference arising from ground loops on the ground line. In addition, the newly added ground line choke improves asymmetric attenuation in higher frequencies in medical filter versions. The KFA series with existing common-mode choke on the phase and neutral conductors, together with an additional ground line choke, is well enhanced to address the growing EMC challenges facing compliance engineers today.

Ground loops arise through different impedances of different ground line connections in one or multiple pieces of equipment. While all ground connections have the same potential level for the 50 Hz load current, these can have different potential levels for high-frequency interference. The ground line choke, which is wired between the power-inlet connector and the filter output, smartly addresses this phenomenon. Because of its placement directly at the power line input, high-frequency interference currents on the ground line are prevented from bypassing the filter through the equipment housing. The ground line choke isolates the equipment chassis against high frequencies and the equipment ground from the ground on the line power connection. This approach effectively breaks any possible ground loop.

Audio equipment for instance is known for being prone to ground loop problems. Often referred to as hum or buzz, the KFA, with ground line choke, is well suited for suppressing interferences that lead to diminished sound quality. The KFA is also well suited for medical equipment required to use low leakage filters for increased patient safety. The reduced Y capacitance to ground, or absence thereof, leads to reduced asymmetric attenuation in higher frequencies. The KFA with ground line choke helps to compensate for this reduced performance.

The KFA power entry module includes an IEC C14 power inlet connector with a 1- or 2-pole fuseholder and EMC filter and is available in a wide range of models and designs. The series offers current levels from 1A to 10A at 250 VAC according to IEC and UL standards. The series has ENEC and cURus approvals and is suited for applications according to IEC 60950. Special filter versions, M5 and M80, are available for medical devices according to IEC 60601-1. Wiring is done using quick-connect terminals or wire leads. The KFA is compatible with V-Lock cord sets, designed to safeguard against unintentional disconnection of the power.

Technical Data:

- IEC C14 power-Inlet connector with 1/2-pole fuseholder and a filter

- Filter standard, medical M5 / M80 versions

- Rated currents: 1, 2, 4, 6, 10A (ENEC / UL / CSA) at 40°C

- Screw or snap-in assembly

- V-Lock plug-retention safeguard

Applications:

- For applications with noise on the ground wire

- For applications with ground loops

- Applications with high asymmetrical attenuation requirements

- Suited for medical equipment according to IEC 60601-1

Popular SCHURTER products used in audio applications:

- V-Lock Cord Sets

- V-Lock Connectors and Power Entry Modules without filter, with filter

The KEA series

SCHURTER’s compact KEA series power entry module, with 1- or 2-pole fuseholder, now mates with V-Lock cord sets. The KEA’s new V-Lock compatible feature prevents unintended disconnection of the power from the equipment.

Unlike wire bail or clamp accessories, no additional costly hardware is necessary to install the cord retaining system. The cord set safely latches into a notch in the plastic housing of the KEA. Removing the cord set is easily achieved by depressing the latch. V-Lock power cords are offered in a wide range of international plugs.

The KEA is ideal for audio equipment, especially equipment used on stage, where the power to the equipment must withstand mechanical stress on the cord. It features C14 inlet, 1- or 2-pole fuseholder for 5 x 20 mm fuses, 4.8 x 0.8mm quick-connect or PCB terminals, and screw-on or snap-in mounting. Optional voltage selector allows for use in analog equipment exported to international markets. Current rating is 10 A at 250 VAC. The alternate KFA series with EMC line filter is available with current ratings of 1, 2, 4, 6 and 10 A at 125 VAC UL/250 VAC IEC. This series offers an integrated ground line choke to protect against ground loop interferences. Approvals include UL, CSA, VDE and CCC.

With the V-Lock cord retaining system, the cordset safely latches into a notch in the plastic housing of the KEA module. Removing the cordset is easily achieved by depressing the latch. V-Lock power cords are offered in a wide range of cord lengths and country-specific plugs.

Technical features

• V-Lock cord retaining system for appliance inlets and outlets according to IEC 60320-2-2 with cURus and ENEC approvals for equipment end connections

• KEA power entry module:

• IEC appliance inlet C14

• 1- or 2-pole fuseholder for fuses 5x20 mm

• Optional voltage selector

• V-Lock feature standard

Benefits

• highest possible security and reliability against unintentional disconnection of the power cord

• no additional assembly effort

• no further components required

• attractive design

• simple and self-explanatory operation

• available for IEC device plug connections 10 A and 16 A

• protection classes I and II

• available for interconnection cords

Circuit Protection Goes Gold

Circuit Protection Goes Gold

SMD Fuses and Fuseblock with Gold Plated Contacts

SCHURTER announces its 5x20mm fuses and OGN series fuse block with gold-plated contacts. The contact between end-caps and clips provides low contact resistance and corrosion resistance, traits that are known to be highly desired for power protection in pro audio equipment. The fuse block plastic offers enhanced thermal characteristics according to IEC 60695-2-12 & 13. The gold-plated surface mount terminals provide improved solderabillity between the fuse block and printed circuit board.

The FST and SPT 5x20mm fuse series with time-lag characteristic are according to IEC 60127-2. The FST has a low breaking capacity of 35-125A and current range of 50mA up to 20 Amps at 250 Volts AC. The SPT current range is 1-16A and offers a high-breaking capacity of up to 1500 A at 250 VAC, thus allowing for safe interruption of a dangerous fault. The fuses can also be soldered directly onto the board in applications where space is limited.


Cord Retention

The loss of the power supply may have serious consequences for analytical, diagnostic or laboratory equipment in medical technology, mobile measuring instruments, professional audio and video equipment or devices in the food industry. Particularly in the case of electrical appliances that are moved during operation, there is a risk that the mains cable may be unintentionally disconnected from the appliance. Cord retention safety devices can prevent this.

The most common type of cord retention devices are Cord retaining strain reliefs. Depending on the type of appliance plug and the large number of different types of appliance sockets, the correct bracket shape must be selected here.

Safety is our Business

Innovation and Engineering

SCHURTER is a leading innovator and manufacturer of fuses, connectors, circuit breakers, input systems and EMC products as well as a PCB assembly service provider for the electronics industry worldwide. Success for and together with our customers is our permanent incentive. We are accustomed to being innovative to meet challenges in diverse markets. We boldly realize new ideas, and we support and drive forward our R&D teams, each day anew.

Quality across the entire line

Products and services from SCHURTER meet the highest demands on quality – because SCHURTER uses quality-, environmental- and safety-management systems such as ISO 9001, ISO 14001, ISO 45001, the Six Sigma method and the EFQM Excellence Model. All products carry country-specific testing labels such as VDE, ENEC, UL and CCC. Further, customers profit from excellent service and short delivery times thanks to a well-organized international network of Group companies and distributors.

in.schurter.com
en
en
eng-GB
prod //cdn.schurter.com Audio_Landing_Page