SCHURTER_Logo_white.eps
Menu openMenu Close
搜索搜索搜索搜索
寻找什么?

电动汽车充电系统

The rapid increase in electric vehicles on our roads presents us with new challenges. Especially in terms of infrastructure and charging station technology.

Various charging situations

Charging speed influences electromobility

The easiest situation for charging an electric vehicle is when the vehicle is parked at home or work. On average, this is the case 90% of the time. The standard speed of 11 kW/h wallboxes is sufficient for this type of charging.

Other standards apply to public fast charging stations. The charging speed plays a decisive role, as the EV charging time must be waited for. The fastest possible charging is desirable here. In the meantime, battery packs are already being discussed which should allow a full charge in 10 minutes.

If the charging time has to be waited for, the charging speed plays a decisive role in electromobility.

Optimised products for the charging infrastructure provide a remedy

Suppressing electromagnetic emissions

We offer solutions that help to ensure the reliability and user-friendliness of fast charging stations.

By using high-quality EMC components such as electromagnetic Interference filters and EMC chokes, unwanted interference signals can be effectively suppressed, enabling safe and efficient charging. These EMC products are designed for a wide temperature range from -40 to +100°C.

用于壁箱的产品

应用方式

用于输出功率达 22kW 的电动车壁挂式充电站安全电源。

DKIV-1

补偿大电流扼流圈。 体积小,重量轻。 可提供纳米晶或铁氧体环形磁芯。

CSO

大电流保险丝夹。采用特殊铜合金材料以实现高效率,具备非常低的接触电阻。

The ideal filter in just 6 steps

The causes of EMC interference can be of various kinds. Therefore, standard filters are not always the simplest and best solution. We now offer a so-called "Evaluation Board" with which an almost ideal filter.

快速充电站的产品

应用方式

应用于22kW以上电动车快速充电站的 EMC 滤波器产品。

FMAC NEO

用于三相系统的一阶滤波器。紧凑型设计,占板面积小。轻量化设计。

FMBD EP

用于三相系统的二阶滤波器。高电压版本,宽广温度范围。

FMER SOL

直流滤波器,适用于达1500V的高压。轻量化的设计。

HMI Input Systems

Customised operating unit (HMI Human Machine Interface) e.g. PCAP (projected capacitive) touch panel with printed glass front and bonded display or resistive glass-film-glass touch panel.

PSE

具备不同种类外壳材料的压电开关:铝、镀铬黄铜或不锈钢。 寿命超过2,000万次致动。

The ideal filter in just 6 steps

The causes of EMC interference can be of various kinds. Therefore, standard filters are not always the simplest and best solution. We now offer a so-called "Evaluation Board" with which an almost ideal filter.

车载充电器的产品

应用方式

用于车载充电系统干扰抑制的 EMC解决方案。 《波动干扰发射机》白皮书

DKIH-1

补偿型大电流扼流圈。 体积小,重量轻。开放式设计优化散热,具备纳米晶或铁氧体环形磁芯。

定制绕线产品

定制线圈架和各种磁芯形状上的绕组。 纳米晶或铁氧体环形磁芯。

The ideal filter in just 6 steps

The causes of EMC interference can be of various kinds. Therefore, standard filters are not always the simplest and best solution. We now offer a so-called "Evaluation Board" with which an almost ideal filter.

应急充电电缆的产品

应用方式

道路上充电电缆的保护。

DKFS

SMD 端子的电流补偿扼流圈。有垂直式和水平式版本。

DKIH-3

小巧、轻量设计的三相扼流圈。 开放式设计优化散热。具备纳米晶或铁氧体环形磁芯。

UMT 250 规格书

80mA 至 10A的 SMD 保险丝。以最小的封装实现最大分断能力。 适用于脉冲型连续电流。

ScrollToTop
Close您将跳转到所选国家的页面地址。因此, 您将离开硕特主页。
如果您想浏览所选国家的页面, 请点击以下按钮:
如您想继续浏览硕特全球网站, 请点击以下按钮:www.schurter.com
请知悉, 已为您保存了硕特全球网站的首选项。